In-Line Water Filters Aquawin Water Products > Cartridge Filters / RO Membrane / Hollow Fiber > In-Line Water Filters Post carbon is usually installed at the last stage of water purifier or reverse osmosis system. The main function of the post carbon filter is filter the water after RO membrane , it could filter the water again and improve the taste of water. B-215-25 T33 Hydrogen-Rich Nano Silver Sterilization Filter (Pesticide&Heavy Metal Removal) About (L)271mm x (D)59mm B-214 In-Line CL-10 Post Carbon Filter About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-215-1 In-Line CL-10 Post Carbon Filter (NSF Component) About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-215-5 In-Line CL-10 Post Carbon Filter (EZ) About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-213-4 In-Line CL-10 Post Carbon Filter (EZ) (NSF Component) About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-213-6 In-Line CL-10 Post Block Carbon Filter (NSF Component) About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-213-7 In-Line CL-10 Post Block Carbon Filter (EZ) (NSF Component) About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-215-9 In-Line CL-10 Nano-Silver Activated Carbon Filter In-Out Size: 1/4"Maximum Flow: 0.75GPMMaximum Pressure: 125PSIMaximum Temperature : 100 oFService Life: About 2,000 ~ 2,500GAL B-216 Omnipure CL-10 Carbon Filter (Made In USA) About (L) 254mmFlow : 0.5 G.P.M. (1.9 L.P.M)Temperature : 2-38C, 100FPressure : 125psi B-601-8 Alkaline PH Post Filters Make Water PH Value of 8.00~9.50 About: (D) 53mm; (L) 254mmMax. Flow rate: 200 L/24hMax. Pressure: 6barTemperature Range: 51°CBalance pH: pH8.00~9.50Capacity: 3000 liters B-215-6 Deionization (DI) Post Filters About (D) 53mm; (L) 254mmMax. Flow rate: 200 l/24hMax. Pressure: 4barTemperature Range: 45~100 FCapacity: About 500 gallons (2000 liters) B-215 In-Line CL-10 T33 Carbon (Long) About (L) 264mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-317-19 In-Line Hollow Fiber UF Membrane Ultrafilter (1/4"NPT) About : (L) 255MM; (D) 50MMBore diameter: 0.01-0.1umTemperature scale for use : 4~40°CPorosity : 40-50%Suggested operation pressure about ≤ 30psiPH level: 2-14 B-126 In-Line Disposable PF-5 PP Filter About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-226-1 6" In-Line CL-10 Carbon Filter Select box and Click: Products RO System Units Water Dispensers(Floor Standing / Tabletop / Boiler) Whole House Water Filter Whole House UF Water Filter Filtration Systems FRP tank, Brine tank & Control valve Ozonizers UVC Lighting Shower Filter Taiwan Made EVERGREEN Cartridge Everpure Bracket Water Purifier Storage Tanks Filter Housings(RO Membrane / Refillable / Stainless Steel) Cartridge Filters / RO Membrane / Hollow Fiber Faucets / Faucet Ring EZ & Jaco Fittings Water Treatment Media Water Tester / Electrolyzer / IC Controller /Pressure Gauge / Flow Meter RO Accessories / Parts / Bracket
Post carbon is usually installed at the last stage of water purifier or reverse osmosis system. The main function of the post carbon filter is filter the water after RO membrane , it could filter the water again and improve the taste of water. B-215-25 T33 Hydrogen-Rich Nano Silver Sterilization Filter (Pesticide&Heavy Metal Removal) About (L)271mm x (D)59mm B-214 In-Line CL-10 Post Carbon Filter About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-215-1 In-Line CL-10 Post Carbon Filter (NSF Component) About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-215-5 In-Line CL-10 Post Carbon Filter (EZ) About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-213-4 In-Line CL-10 Post Carbon Filter (EZ) (NSF Component) About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-213-6 In-Line CL-10 Post Block Carbon Filter (NSF Component) About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-213-7 In-Line CL-10 Post Block Carbon Filter (EZ) (NSF Component) About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-215-9 In-Line CL-10 Nano-Silver Activated Carbon Filter In-Out Size: 1/4"Maximum Flow: 0.75GPMMaximum Pressure: 125PSIMaximum Temperature : 100 oFService Life: About 2,000 ~ 2,500GAL B-216 Omnipure CL-10 Carbon Filter (Made In USA) About (L) 254mmFlow : 0.5 G.P.M. (1.9 L.P.M)Temperature : 2-38C, 100FPressure : 125psi B-601-8 Alkaline PH Post Filters Make Water PH Value of 8.00~9.50 About: (D) 53mm; (L) 254mmMax. Flow rate: 200 L/24hMax. Pressure: 6barTemperature Range: 51°CBalance pH: pH8.00~9.50Capacity: 3000 liters B-215-6 Deionization (DI) Post Filters About (D) 53mm; (L) 254mmMax. Flow rate: 200 l/24hMax. Pressure: 4barTemperature Range: 45~100 FCapacity: About 500 gallons (2000 liters) B-215 In-Line CL-10 T33 Carbon (Long) About (L) 264mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-317-19 In-Line Hollow Fiber UF Membrane Ultrafilter (1/4"NPT) About : (L) 255MM; (D) 50MMBore diameter: 0.01-0.1umTemperature scale for use : 4~40°CPorosity : 40-50%Suggested operation pressure about ≤ 30psiPH level: 2-14 B-126 In-Line Disposable PF-5 PP Filter About (L) 254mmFlow : 1.0 G.P.M. (3.79 L.P.M)Diameter : 10microns(activated carbon) 1or 5 microns (pp cartridge)Temperture : 52C, 120FPressure : 125psi B-226-1 6" In-Line CL-10 Carbon Filter Select box and Click: